Class: E410NiMo-16

AWS: A5.4

Conforms to Certification: AWS A5.4     ASME SFA A5.4

Weld Process: Shielded Manual Metal Arc

AWS Chemical Composition Requirements
C=0.06 max	Si=0.90 max
Cr=11.0 – 12.5	P=0.04 max
Ni=4.0 – 5.0	S=0.03 max
Mo=0.40 – 0.70	Mn = 1.0 max
Cu =0.75 max

Application
Type E410NiMo-16 is designed to weld materials of similar chemical composition in cast and wrought forms. Preheat and interpass temperature not less than 300F is recommended. Post-weld heat treatment should not exceed 1150F.

Deposited Chemical Composition % (Typical)
C=0.05	Cr=11.70	Ni=4.5
Si=0.40	Mn=0.75	Mo=0.50

 

Deposited All Weld Metal Properties %
(Typical) As-Welded
Yield Strength	134,000 psi
Tensile Strength	123,000 psi
Elongation	18%

Deposited Charpy-V-Notch Impact Properties %
Not Applicable

Recommended Welding Parameters
Diameter	Voltage	Flat	Amperage Vertical & Overhead
3/32	24-28	70-85	65-75
1/8	26-30	85-110	80-90
5/32	28-32	110-140	100-120
3/16	28-32	120-160	110-130