Class: ERNiCrMo-11

AWS: A5.14

Conforms to Certification: AWS A5.14           ASME SFA A5.14

Weld Process: GTAW Welding Process

AWS Chemical Composition Requirements
C = 0.03 max	Cu = 1.0 – 2.4
Mn = 1.5 max	Ni = Remainder
Fe = 13.0 – 17.0	Co = 5.0 max
P = 0.04 max	Cr = 28.0 – 31.5
S = 0.02 max	Mo = 4.0 – 6.0
Si = 0.80 max	Nb + Ta = 0.30 – 1.50
Other = 0.50 max	W = 1.5 – 4.0

Please Call For More Information and Available Sizes

Application
ERNiCrMo-11 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys.

Deposited Chemical Composition % (Typical)
C = 0.02	Co = 3.50	Ni = Balance
Mn = 0.90	Cu = 1.75	Cr = 29.5
Fe = 15.5	W = 2.10	Mo = 5.0

 

Deposited All Weld Metal Properties % (AW)
Tensile Strength	89,000 psi
Elongation	28%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for TIG, MIG, and SAW Welding of Nickel Alloys
Process	Diameter of Wire	Voltage (V)	Amperage (A)	Gas
Tig	.035 inches x 36	12 – 15	60 – 90	100% Argon
	.045 inches x 36	13 – 16	80 – 110	100% Argon
	1/16 inches x 36	14 – 18	90 – 130	100% Argon
	3/32 inches x 36	15 – 20	120 – 175	100% Argon
	1/8 inches x 36	15 – 20	150 – 220	100% Argon

Note:  Other shielding Gases may be used for Tig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.