Class: ERNiCrMo-2

AWS: A5.14

Conforms to Certification: AWS A5.14              ASME SFA A5.14

Weld Process: GMAW, ASAW Welding Processes

AWS Chemical Composition Requirements
C  = 0.05 – 0.15	Cu = 0.5 max
Mn = 1.0 max	Ni = Remainder
Fe = 17.0 – 20.0	Co = 0.5 to 2.5
P = 0.04 max	Cr = 20.5 – 23.0
S = 0.03 max	Mo = 8.0 – 10.0
Si = 1.0 max	W = 0.2 – 1.0
Other = 0.50 max

 

Available Sizes
Diameter X Spool Sizes	Diameter X Coil Sizes
.035 x 33#	1/16 x COIL
.045 x 33#	3/32 x COIL
1/16 x 33#	1/8 x COIL
	5/32 x COIL

Application
ERNiCrMo-2 is used for welding nickel-chromium-molybdenum base materials to itself, steel and other nickel base alloys. Can clad steel using GTAW, GMAW, welding processes. Can weld on high nickel base alloys exposed to high temperatures.

Deposited Chemical Composition % (Typical)
C = 0.10	Cr = 22.0	Ni = Balance
Fe = 19.5	Mo = 9.75

 

Deposited All Weld Metal Properties % (AW)
Tensile Strength	99,000 psi
Elongation	27%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys
Process	Diameter of Wire	Voltage (V)	Amperage (A)	Gas
MIG	.035 inches	26 – 29	150 – 190	75 % Argon +25% Helium
	.045 inches	28 – 32	180 – 220	75 % Argon +25% Helium
	1/16 inches	29 – 33	200 – 250	75 % Argon +25% Helium
SAW	3/32 inches	28 – 30	270 – 350	Suitable Flux May Be Used.
	1/8 inches	29 – 32	350 – 450	Suitable Flux May Be Used.
	5/32 inches	30 – 33	400 – 550	Suitable Flux May Be Used.

Note: Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.