Class: ErNiCrMo-2

AWS: A5.14

Conforms to Certification:  AWS A5.14             ASME SFA A5.14

Weld Process: GTAW Welding Process

AWS Chemical Composition Requirements
C = 0.05 – 0.15	Cu = 0.5 max
Mn = 1.0 max	Ni = Remainder
Fe = 17.0 – 20.0	Co = 0.5 to 2.5
P = 0.04 max	Cr = 20.5 – 23.0
S = 0.03 max	Mo = 8.0 – 10.0
Si = 1.0 max	W = 0.2 – 1.0
Other = 0.50 max

Available Sizes
.035 x 36
.045 x 36
1/16 x 36
3/32 x 36
1/8 x 36

Application
ERNiCrMo-2 is used for welding nickel-chromium-molybdenum base materials to itself, steel and other nickel base alloys. Can clad steel using GTAW, GMAW, welding processes. Can weld on high nickel base alloys exposed to high temperatures.

Deposited Chemical Composition % (Typical)
C = 0.10	Cr = 22.0	Ni = Balance
Fe = 19.5	Mo = 9.75

 

Deposited All Weld Metal Properties % (AW)
Tensile Strength	99,000 psi
Elongation	27%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for TIG, MIG, and SAW Welding of Nickel Alloys
Process	Diameter of Wire	Voltage (V)	Amperage (A)	Gas
Tig	.035 inches x 36	12 – 15	60 – 90	100% Argon
	.045 inches x 36	13 – 16	80 – 110	100% Argon
	1/16 inches x 36	14 – 18	90 – 130	100% Argon
	3/32 inches x 36	15 – 20	120 – 175	100% Argon
	1/8 inches x 36	15 – 20	150 – 220	100% Argon

Note:  Other shielding Gases may be used for Tig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.